Melbourne
Cracks in a Melbourne house. Measure before you underpin.
Melbourne houses move on basaltic clay in the west and north, and on older footings through the inner suburbs. The clay and the footing change the detail. The offer does not: measure what the building is doing before anyone sells you a repair.
What is different in Melbourne
Western and northern suburbs sit on basaltic clays that are often highly reactive. They shrink through a dry spell and swell after rain. Inner suburbs add a different building: older brick and weatherboard on strip footings, altered, extended, and often close to trees that have been there longer than the extension.
Newer estates show it in the slab. Waffle pods and raft slabs can tilt or dish when moisture under the house is uneven. The owner sees a sloping floor and a door that sticks, then a quote to underpin the low edge. If the middle has heaved because a pipe is leaking, that quote props the wrong place.
A dry inspection month is not the whole year. Seasonal movement still has to be watched through a change in the weather, not assumed from one afternoon with a level. Monitoring is how that record is kept, with SlabSense devices left on site and read each day.
We will publish Melbourne job notes when an owner agrees. Until then this page describes the ground and the service, not a borrowed case study.
What to do if your Melbourne house is cracking
- 1. Note the pattern, not the worst photo. Older brick and weatherboard houses show it in the walls. Waffle pods and raft slabs show it as a sloping floor and a door that no longer latches.
- 2. Treat a low edge as a question, not a scope of works. If the middle has risen because a pipe is leaking, propping the low edge props the wrong place.
- 3. Get an independent inspection before an engineering design. You may still need an engineer to design a repair. You do not need that design as the first call for every crack.
- 4. Watch a change in the weather if one visit cannot tell. A dry month is not the whole year. The record has to cover the change in the weather, not one afternoon with a level.
Questions people ask
What causes houses to move in Melbourne?
Large parts of Melbourne's west and north sit on basaltic clays that shrink in dry weather and swell when they wet up. Older brick and weatherboard houses on strip footings show it as cracked masonry and racked openings. Newer estates on waffle pods and raft slabs show it as floor slopes and stuck doors. Trees and leaking drains push the same clay further. The suburb changes the detail. It does not change the question: is it going down, coming up, or moving with the season?
Is a Melbourne crack inspection the same as an engineering report?
No. There are engineering firms in Melbourne who inspect cracks in detail, and you may still need one of them to design a repair. GMA is the independent step before that: levels, the pattern of movement, and monitoring where a single visit cannot tell heave from subsidence. We do not sell the underpinning.
Are cracks normal in Melbourne houses on clay?
Cracks are common on the basaltic clays of the west and north, and in older houses that have been extended. Common is not the same as harmless, and it is not a reason to underpin the low side. The useful question is whether the house is going down, coming up, or moving with the season.
